Airsoft accumulator / battery Li-Ion HellArms 2S 7,4V / 5600mAh 70/170A CQB LARGE
Airsoft accumulator / battery Li-Ion HellArms 2S 7,4V / 5600mAh 70/170A CQB LARGE
Powerful airsoft Li-Ion battery with nominal voltage 7.4V, capacity 5600 mAh with discharge currents 70A permanently and 170A short-term. The connector can be selected XT60 or T-Dean. More
Product code: HA282C Shipping and Payment
Powerful airsoft Li-Ion battery with nominal voltage 7.4V, capacity 5600 mAh with discharge currents 70A permanently and 170A short-term. The connector can be selected XT60 or T-Dean. More
Product code: HA282C Shipping and Payment
Airsoft Li-Ion accumulator / battery of our own production consists of four cells in a steel casing. The battery has a voltage of 7.4V, a capacity of 5600mAh and can handle long term discharge currents of 70A and short term 170A. We have tested these values both in laboratory conditions and in practice.
Thanks to the steel casing, there is no inflation as with Li-Pol batteries. Due to its size and capacity it is more suitable for airsoft use. The battery is able to operate in temperatures from -40 to 60 °C. The battery has a large capacity even for its small size. After 500 cycles the battery has 90% of its original capacity. This means that if you go out to play on average 8 months of the year every Saturday and take proper care of the Li-Ion battery, your total capacity will drop by 10% in 14 years.
Application Li-Ion 5600mAh 7.4V
This battery is suitable for Crane stock or G36 forearm etc. Due to its higher hardness, it is also suitable for high-performance assemblies. An example of the recommended maximum load is the assembly:
Recommended assemblies for this battery:
Gears | 12:1 | 13:1 | 16:1 | 18:1 | 100:200 |
Motor HellArms |
Up to M125 - 28 RPS |
Up to M130 - 26 RPS |
Up to M140 - 21 RPS |
Up to M150 - 18 RPS |
Up to M150 - 15 RPS |
Motor ASG, SHS 30K | Up to M125 | Up to M130 | Up to M140 | Up to M150 | Up to M150 |
Basic motor | Not suitable | Not suitable | Up to M130 | Up to M130 | Up to M140 |
*The neodymium magnet load motors (Guarder, ASG, SHS) will have better response and higher cadence than the basic ones. The HellArms motor will have a higher cadence and lower response than the motors previously mentioned. High speed motors combined with lower gearing than 100:200 and this battery are not recommended at all.
*The springs in the table above are Guarder and ASG Ultimate, which are the only springs we recommend using due to their characteristics, durability, performance stability, and their minimal manufacturing differences in stiffness.
Find out how to care for this battery in the article below
Why buy a battery from us?
We carefully select the most suitable cells on the market that meet our requirements for airsoft use. We take great care with every battery we produce and test it at the end of production. The batteries do not deform, they have durable hand soldered joints that are individually stripped. The individual cells are connected by a wide copper strip with a cross section of 2.5 mm for the best possible electrical and thermal conductivity. The main wiring is made of the highest quality 1.5 mm diameter silicone wires on the market. The connector can be either XT60 (which we recommend) or T-Dean.
Articles
Maintenance instructions for the Li-Ion battery
In this article you will learn how to take care of Li-Ion batteries.